Схема СВЧ печи Samsung CE2713R

Формат файла: PDF

1. Precaution
1-1 Safety precautions ( )
Samsung Electronics
1. All repairs should be done in accordance
with the procedures described in thismanual. This product complies withFederal Performance Standard 21 CFR Subchapter J (DHHS).
2. Microwave emission check should be
performed to prior to servicing if the oven isoperative.
3. If the oven operates with the door open :
Instruct the user not to operate the oven andcontact the manufacturer and the center fordevices and radiological health immediatly.
4. Notify the Central Service Center if the
microwave leakage exceeds 5 mW/cm
5. Check all grounds.
6. Do not power the MWO from a "2-prong"
AC cord. Be sure that all of the built-inprotective devices are replaced. Restore anymissing protective shields.
7. When reinstalling the chassis and its
assemblies, be sure to restore all protectivedevices, including: nonmetallic controlknobs and compartment covers.
8. Make sure that there are no cabinet openings
through which people--particularlychildren--might insert objects and contactdangerous voltages. Examples: Lamp hole,ventilation slots.
9. Inform the manufacturer of any oven found
to have emmission in excess of 5 mW/cm
Make repairs to bring the unit intocompliance at no cost to owner and try todetermine cause.Instruct owner not to use oven until it hasbeen brought into compliance.
CENTRAL SERVICE CENTER
10. Service technicians should remove their
watches while repairing an MWO.
11. To avoid any possible radiation hazard,
replace parts in accordance with the wiringdiagram. Also, use only the exactreplacements for the following parts:Primary and secondary interlock switches,interlock monitor switch.
12. If the fuse is blown by the Interlock Monitor
Switch: Replace all of the following at thesame time: Primary, door sensing switchand power relay, as well as the InterlockMonitor Switch. The correct adjustment ofthese switches is described elsewhere in thismanual. Make sure that the fuse has thecorrect rating for the particular model beingrepaired.
13. Design Alteration Warning:
Use exact replacement parts only, i.e., onlythose that are specified in the drawingsand parts lists of this manual. This isespecially important for the Interlockswitches, described above. Never alter oradd to the mechanical or electrical designof the MWO. Any design changes oradditions will void the manufacturer'swarranty.10.Always unplug the unit's ACpower cord from the AC power sourcebefore attempting to remove or reinstallany component or assembly.
14. Never defeat any of the B+ voltage
interlocks. Do not apply AC power to theunit (or any of its assemblies) unless allsolid-state heat sinks are correctly installed.
15. Some semiconductor ("solid state") devices
are easily damaged by static electricity. Suchcomponents are called ElectrostaticallySensitive Devices (ESDs). Examples includeintegrated circuits and field-effecttransistors.
Immediately before handling anysemiconductor components or assemblies,drain the electrostatic charge from yourbody by touching a known earth ground.
16. Always connect a test instrument's ground
lead to the instrument chassis ground beforeconnecting the positive lead; always removethe instrument's ground lead last.
Follow these special safety precautions. Although the microwave oven is completely safe during ordinaryuse, repair work can be extremely hazardous due to possible exposure to microwave radiation, as well aspotentially lethal high voltages and currents.