Схема домашнего кинотеатра Other SONY HCD-V8800

Формат файла: PDF

Use of controls or adjustments or performance of proceduresother than those specified herein may result in hazardous ra-diation exposure.
Notes on chip component replacement· Never reuse a disconnected chip component.· Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing· Keep the temperature of soldering iron around 270°C
during repairing.
· Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
· Be careful not to apply force on the conductor when soldering
or unsoldering.
Laser component in this product is capable of emitting radiationexceeding the limit for Class 1.
This appliance is classified asa CLASS 1 LASER product.The CLASS 1 LASER PROD-UCT MARKING is located onthe rear exterior.
This cautionlabel is locatedinside the unit.
MODEL IDENTIFICATION-- BACK PANEL --
E, SP model
4-992-220-0
4-992-220-1
4-992-220-2
4-992-220-3
· Abbreviation
SP : Singapore modelMY : Malaysia modelIA : Indonesian modelCH : Chinese model
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY MARK
! OR DOTTED LINE
! ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.