Схема домашнего кинотеатра Other SONY MZ-R55

Формат файла: PDF

Battery operation time
NH-14WM nickel
metal hydride
rechargeable battery
Two LR6 (SG)
Sony alkaline dry batteries
NH-14WM + Two LR6 (SG)
Approx. 78.9
84 mm (w/h/d)
Approx. 147 g (5.2 oz) the recorder onlyApprox. 190 g (6.7 oz) incl. a recordable MD,and NH-14WM nickel metal hydride rechargeable battery
Supplied accessories
AC power adaptor AC-MZR55 (1)Headphones with a remote controlMDR-E838SP and RM-MZR55 (1)NH-14WM nickel metal hydride rechargeable battery (1)Dry battery case (1)Rechargeable battery carrying case (1)Carrying pouch (1)AC plug adaptor (1) (Tourist model only)
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
OR DOTTED LINE WITH
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTS WHOSEPART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR INSUPPLEMENTS PUBLISHED BY SONY.
Flexible Circuit Board Repairing
· Keep the temperature of the soldering iron around 270
during repairing.
· Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
· Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
· Never reuse a disconnected chip component.· Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Precautions for Laser Diode Emission Check
When checking the emission of the laser diode during adjust-ments, never view directly downwards as this may lead toblindness.
Precautions for Using Optical Pick-up
(KMS-280A)
As the laser diode inside the optical pick-up damages by staticelectricity easily, solder the laser tap of the Optical pick-upflexible board when handling. Also take the necessary measuresto prevent damages by static electricity. Handle the Optical pick-up flexible board with care as it breaks easily.
Optical Pick-up flexible board