Схема и документация усилителя Other MORLEY EMERALD ECHO EEB

Формат файла: PDF

For purchasing a Morley® pedal.
Please take a few minutes to familiarize yourself with thefeatures of your new pedal. With common sense handling,it should last for years. We know you will appreciate therugged construction of your Morley®. Most of all, we hopeyou enjoy using it as much as we enjoyed building it.
The Emerald Echo has three controls: REPEAT, MIX &DELAY. Understanding these controls will help you to getthe sound you are looking for.
The REPEAT control adjusts the amount of repeats theecho will reproduce when a note is hit. The amount rangesfrom one repeat to multiple repeats.
The MIX control adjusts the mix of original signal andeffected signal. Refer to the sample settings section of thismanual for hints. Keep in mind that your overall sound is aproduct of your guitar, amp, pickups, effects, cables,strings and of course - playing style.
The DELAY control adjusts the amount of delay time from0 to 300 milliseconds.
CONNECTIONS
IN: Input jack. Plug instrument into this jack using 1/4"guitar cable.OUT: Connect amplifier to this jack using a 1/4" guitarcable.9V: Connect Morley's 9 volt 300 milliamp regulated ACadapter to this jack.
NOTE: You'll find your cord fits very tightly into our inputand output jacks. The tight fits helps prevent the cord frombecoming accidentally unplugged from the pedal. Makesure the cords are completely plugged in for best results.
Use only Morley's 9-volt 300 milliamp regulated adapters.Using a non-regulated adapter could cause a lowfrequency hum in your amplifier.
The EMERALD ECHO is designed to use one 9 volt batterywhen not using an adapter. We suggest you use a goodquality alkaline battery.Your pedal is designed for long battery life. To prolongbattery life, unplug your cord completely from the inputjack when not using the pedal. When the pedal is not usedfor extended periods, we recommend you remove thebattery from the pedal or replace it every six month toprevent leakage problems.
BATTERY REPLACEMENT
When the battery becomes weak, the overall delay effectwill become weak and your signal may become slightlydistorted.Remove the battery door located on the bottom of thepedal. (a short cord is attached to the door to help preventloss. Once the door is off, the old battery can be removedfrom the battery snap and a new battery plugged in. Makesure the polarity (+/-) is correct before inserting the newbattery.When you replace the battery door , you will notice it fitsvery tightly against the battery. This prevents the batteryfrom rattling inside the pedal.
All Morley® pedals are warranted for two years from dateof purchase. To obtain warranty service call1-800-639-4668.
SPECIFICATIONS
POWER: 9 Volt BatteryCURRENT DRAW: 11 mA @ 9 VDCWEIGHT: 1.2 lb./ .55 kgINDICATOR: Echo effect on or Bypassed
185 Detroit Street, Cary, IL 60013
Phone:(847) 639-4646
Fax: (847) 639-4723
www.morleypedals.com